Pass 300 Hours Salt Spray

Cold Coiling SAE 9254 Chromium Alloy Coil Spring

Pass 500,000 Times Compression

Easy Low Down

Improved Rust Prevention

Compatible With All Type Absorber

Perfect Spring Rate

Advance Cold Forming Technology

In contrast to hot forming where the spring is coiled at an elevated temperature, our sport lowered springs are made through the technique of cold forming (normal temperature forming at a non-elevated temperature). By using a dedicated new-type coiling machine, deterioration of the material is prevented and advanced performance is retained.

Chromium Alloy Spring

Springs are made of chromium alloy SAE9254 steel and passed 500,000 times of compression test and inspection with less than 5% deformation.

Easy Low Down Red Spring to Brightly Decorate Your Suspension

Produced for an easy and pleasurable suspension tuning with sporty driving for everyone. Designed and developed to offer improved driving performance and superior ride comfort. It is constructed by using material with tensile strength of over 200kgf/mm2, yet is offered at a reasonable pricing under through cost management.

Improved Rust Prevention

The surface is treated with powder coating which forms thick film and is highly durable in addition to zinc phosphate coating as pre-paint. This results in a very effective rust prevention where such paint provide superior protection against snow melting agent (calcium chloride) compared to existing paint solvent.

Silencer Rubber

To prevent noise caused by coil-to-coil contact and / or from mounting portion, the silencer rubber is applied to each spring in reducing unpleasant noise commonly caused by the use of lowered springs (except some models).

Perfect Spring Rate

The spring rate setting is perfectly designed for each vehicle to optimize comfort level and look appearance.